欢迎访问通用部件网!
热线电话:0755-26970048

当前位置: 首页 >通用部件>模具>模具标准件 >美国ProgressiveCVE Monitor电子模具计数器现货供应5个全国包

美国ProgressiveCVE Monitor电子模具计数器现货供应5个全国包

起批量
1
2-9
>=10

产品属性

专业生产批发模具计数器/CUMSA电子模具计数器/CVE模具计数器/气辅模具气辅针/氮气针,氮气喷嘴

expanding the line of mold monitoring solutions, the new cve monitor v2 tracks mold 

activity, allowing users to view the data on the display or from comprehensive reports 
using ondemand or the new cve live system.
features:
? 7-digit lcd display with a push button to move through the display modes
? 4gb flash drive for file storage and 4+ year battery within monitor
? water resistant with an ingress protection rating of ip52
? maximum temperature: 190° f (90° c)
? dimensional compatibility with progressive’s mechanical counterviews
? mini usb connectivity for data retrieval with cables sold separately
catalog 
number deion
cve-m cve monitor v2 mold maker/molder version including 
#8-32 x 1” shcs (2) and m4 x 25mm shcs (2)
catalog 
number deion
cve-int internal extension rod (8”/200mm) including 
a hex key for cve monitor set screw removal.
cve-ext external mounting block including
#8-32 x 1” shcs (2) and m4 x 25mm shcs (2)
oem-specific cve monitors are available with additional features. 
contact progressive for more information.
how to order: 
? for installation below parting line (ie. rails as shown in the center 
graphic above), order (1) cve-m and (1) cve-int.
? for installation outside of the mold (right graphic), order (1) cve-m 
and (1) cve-ext.general components
d-2
cve monitor
alert mode
retrofitting and removal
cables and connectivity
preventive maintenance
during initialization, the initial preventive maintenance point and the pm interval are entered and saved 
onto the cve monitor. then, when the pm is within 10% of the initial point, the display will flash “pm due” 
as shown at right. users can then ‘snooze’ the alert by holding for 2 seconds, returning it to total cycles. 
when a pm is performed using ondemand and noted as such, the date/time will be written to the cve 
monitor and then the alert is stopped- until reaching 10% of the next pm point. if no pm is performed, the 
cve monitor will continue to alert the user until snoozed or the pm is ultimately recorded.
low battery
the cve monitor has a battery life of approximately 4.5 years in typical molding environments where 
temperatures are controlled. when the battery is within 6 months of its expected end of life, the display will 
flash as shown at right. users can then ‘snooze’ the alert by holding for 2 seconds, returning it to the total 
cycles. the alert will appear every 30 days as a reminder to transfer the stored data to a new cve monitor.
retrofit cve for counterview tools
during initialization, molders can start the cycle count with the tool’s actual cycle count from an existing 
counterview or known cycles from maintenance records. once entered, the user can see the total cycles 
for the tool, which includes the count of the cycles from the counter and those run with the cve monitor. 
in the graphic at right, the tool had 1,000,000 cycles on it originally, but ran 507,288 after the cve monitor 
was installed.
removal monitoring
when the cve monitor is removed from the tool for any reason (ie. cleaning) the pins 
on the back of the device will record an event of its removal. after viewing the retrofit 
number above, the display will move into the screen shown at right, designating the 
number of times the monitor was removed from the mold.
above: ondemand allows users to view data and keep a record of reports run, 
outlining the reason for the report generation including pm, general queries, 
revision changes, and repairs. notes can be included and ondemand records 
the person generating the document for accurate history. 
left: cables are available for use with the cve monitor and are required for both 
connecting to the computer for ondemand and for the live system.

规格参数
包装参数
体积(m²)
产品重量(kg)
代理商供货
退换货规则说明
申请方式

1,在线申请:您可以在"我的订单"中找到您需要退换修的订单,点击”申请退款/退货”即可。我们的工作人员会在2个工作日 内和您取得联系,你可以随时在线查看你的退换修状态。

注意事项

1,“7天无理由退换货”适用于买家在收到货品后因不满意货品希望退换货的情形。

2,因质量问题产生的退换货,邮费由平台供应商承担(此质量问题为货品破损或残缺)。非商品质量问题的退换货,应由买家承担往返运费。

3,退换货要求退换的商品在平台供应商收到时有完整的外包装、配件、标牌等;待退换的物品被用过、人为破坏或标牌拆卸的不予退换。

(1)符合退货政策的商品必须包装完整、数量准确且不影响再次销售,退货的同时必须退回相应的发票和相关文件。

(2)请对寄回的商品妥善包装,若是退换货过程中由于包装过于简单造成的物流损坏,平台供应商不承担商品完整责任。

(3)发票需单独寄送。退换货时,如涉及发票退回,请您不要将发票放在货物中一起寄送,平台供应商客服人员将和您确认发票寄送地址,避免丢失。

4,退货商品的价款到账时间因支付方式的不同而有所差异,具体应参照相关银行或支付工具的说明提示,平台供应商不对退换货费用的到账时间做任何形式的保证。

特别提醒:为避免由于商品滞留造成的经济损失,所有退换货商品,买家应在所规定之时间内发回(以物流签收时间次日起7天内为准),超过规定时间仍不能将退换商品发出的,平台供应商将不予接受该退换货商品。

联系方式
注意:1 . 使用电话联系可有效保证您的号码隐私不被泄露
          2 . 拨打后可在后台进行拨打记录查询
          3 . 成交后在会员中心确认可获得积分
联系人:邓海荣 (市场部/市场经理)
电话:13528239696
给我留言
注意:1. 供应商将在24小时内给您回复,回复内容将以短信形式发送至您手机。
2. 对产品的尺寸,质量,规格,库存等方面技术问题进行咨询,我们有专人进行回复,因厂家随时会更改产品的相关信息,请以厂家实际产品为准。
咨询产品:
美国ProgressiveCVE Monitor电子模具计数器现货供应5个全国包
联系电话:
联系人:
留言详情: